How to Test for Mold?
Follow Easy Instructions To Take a Sample:
- Lightly TOUCH the
sticky side of the TAPE strip TO THE TEST SURFACE and then remove. The tape should show a
visible deposit, but should not appear “overloaded”. (If a sample is too heavy
or has large particles, it can be difficult to read under the microscope and should be
repeated.)
- PLACE the TAPE
SAMPLE ONTO THE PLASTIC SLIDE attached to the MAIL-BACK TEST CARD (align it with
underlying drawing).
- LABEL the TAPE
with the sample number using a pen.
- RECORD the ROOM
AND ITEM SAMPLED on the corresponding lines to the left of the slide.
- REPEAT steps 1-4
for OTHER sample test LOCATIONS (option of 1, 2 or 3 tests per kit).
- PLACE the
MAIL-BACK TEST CARD in the self-addressed envelope and drop it in the MAIL.
- RECEIVE your
written RESULTS along with an INFORMATION BOOKLET describing how to clean up and prevent
mold growth.
[Designed to be easy-to-use, reliable, and
helpful for both consumer and professionals.]
Call 1-866-225-MOLD
Black Mold | Mold Inspection Photos | Mold
Remediation Guidelines |
Mold Cleaning
Tips and Safety Precautions | Mold Prevention Measures |
Home Assessments for Indoor Allergens
Residential IAQ Questionnaire
Information on Fungal
Spores
Website Links 1
Website
Links 2
Website
Links 3
Website Links 4
Website Links 5
|
